Prof. Sreedhara Sheshadri Publications
PP Duvvuri, S Sukumaran, RK Shrivastava, S Sreedhara, Modeling the effect of parametric variations on soot particle size distribution in a diesel engine,, Journal of Energy Resources Technology, 2020,
PP Duvvuri, RK Shrivastava, S Sukumaran, S Sreedhara, Numerical modeling of thermophoretic deposition on cylinder liner of a diesel engine using a sectional soot model, Journal of Aerosol Science, 2020,
PP Duvvuri, RK Shrivastava, S Sreedhara, Numerical optimization of a diesel combustion system to reduce soot mass and particle number density, FUEL, 2020,
PP Duvvuri M. Krishnamoorthi, S. Sreedhara, Experimental, numerical and exergy analyses of a dual fuel combustion engine fuelled with syngas and biodiesel/diesel blends, Applied Energy, 2020,
Raj, Vinay C; Kuntikana, Pramod; Sreedhara, S; Prabhu, SV, ,Heat transfer characteristics of impinging methane diffusion and partially premixed flames, International Journal of Heat and Mass Transfer, 2019,
P Gaikwad, S Sreedhara, OpenFOAM based Conditional Moment Closure (CMC) model for solving non-premixed turbulent combustion: Integration and validation, Computers & Fluids,, 2019,
PP Duvvuri, S Sukumaran, RK Shrivastava, S Sreedhara, Modeling Soot Particle Size Distribution in Diesel Engines, FUEL, 2019,
KG Bhide, S Sreedhara, Assessment of Tabulated Premixed Conditional Moment Closure Model Using Direct Numerical Simulation, Combustion Science and Technology, 2019,
KG Bhide, S Sreedhara , Assessment of Tabulated Premixed Conditional Moment Closure Model Using Direct Numerical Simulation, Combustion Science and Technology, 2019,
P Murkute, H Ghadi, S Sreedhara, S Chakrabarti,, Detailed investigation of photoluminescence, structural, and elemental properties of ZnO thin films under various annealing ambient, Superlattices and Microstructures, 2019,
T Sukirt, P Gaikwad, S Sreedhara, Reynolds-Averaged Navier-Stokes Simulations of Turbulence-Radiation Interaction in a Turbulent Diffusion Jet Flame, Journal of Thermophysics and Heat Transfer, 2019,
Bhide, Kedar G; Sreedhara, S, Direct Numerical Simulation of Autoignition in Turbulent Non-premixed Combustion, Modeling and Simulation of Turbulent Combustion, 2018,
Swami, Umakant; Ambekar, Anirudha; Gondge, Dhananjay; Sreedhara, Sheshadri; Chowdhury, Arindrajit, Burn rate characterization of desensitized isopropyl nitrate blends, Combustion and Flame, 2018,
Biswas, Mahitosh; Singh, Sandeep; Balgarkashi, Akshay; Makkar, Roshan; Bhatnagar, Anuj; Sreedhara, Sheshadri; Chakrabarti, Subhananda, Vertical strain-induced dot size uniformity and thermal stability of InAs/GaAsN/GaAs coupled quantum dots, Journal of Alloys and Compounds, 2018,
Raj, Vinay C; Kuntikana, Pramod; Sreedhara, S; Prabhu, SV, Separation of heat transfer components from impinging methane diffusion flames, International Journal of Heat and Mass Transfer, 2018,
Lalwani, Anand; Awate, Swapnil; Chowdhury, Arindrajit; Sreedhara, Sheshadri, Conversion of a single-cylinder internal combustion engine to dual-mode homogeneous charge compression ignition engine, Clean Technologies and Environmental Policy,in press, 2018,
Gaikwad, Pranit; Kulkarni, Hrishikesh; Sreedhara, S, Simplified numerical modelling of oxy-fuel combustion of pulverized coal in a swirl burner, Applied Thermal Engineering, 2017,
Ganesh, V; Deshpande, S; Sreedhara, S, Numerical investigation of late injection strategy to achieve premixed charge compression ignition mode of operation, International Journal of Engine Research, 2016,
Roy, Rudra N; Sreedhara, Sheshadri, Modelling of methanol and H2/CO bluff-body flames using RANS based turbulence models with conditional moment closure model, Applied Thermal Engineering, 2016,
Brijesh, P; Sreedhara, S;, Experimental and numerical investigations of effect of split injection strategies and dwell between injections on combustion and emissions characteristics of a diesel engine, Clean Technologies and Environmental Policy, 2016,
Brijesh, P; Chowdhury, A; Sreedhara, S;, The simultaneous reduction of NOx and PM using ultra-cooled EGR and retarded injection timing in a diesel engine, International journal of green energy, 2015,
Brijesh, P; Chowdhury, A; Sreedhara, S, Advanced combustion methods for simultaneous reduction of emissions and fuel consumption of compression ignition engines, Clean Technologies and Environmental Policy, 2015,
Roy, Rudra N; Kumar, Sudarshan; Sreedhara, Sheshadri, Predictions of lift-off height of turbulent methane and propane flames issuing in cold surroundings using conditional moment closure coupled with an extinction model, Combustion and Flame, 2015,
Roy, Rudra N; Sreedhara, Sheshadri, A numerical study on the influence of airstream dilution and jet velocity on NO emission characteristics of CH4 and DME bluff-body flames, Fuel, 2015,
Brijesh, P; Abhishek, S; Sreedhara, S, Numerical investigation of effect of bowl profiles on performance and emission characteristics of a diesel engine, SAE Technical Paper, 2015,
Ambekar Anirudha, Sreedhara Sheshadri, Chowdhury Arindrajit, Burn rate characterization of iso-propyl nitrate-A neglected monopropellant, Combustion and Flame, 2015,
Roy, Rudra N; Kumar, Sudarshan; Sreedhara, Sheshadri, A new approach to model turbulent lifted CH4/air flame issuing in a vitiated coflow using conditional moment closure coupled with an extinction model, Combustion and Flame, 2014,
Brijesh, P; Harshvardhan, A; Sreedhara, S, ,A study of combustion and emissions characteristics of a compression ignition engine processes using a numerical tool, International Journal of Advances in Engineering Sciences and Applied Mathematics, 2014,
Brijesh, P; Sreedhara, S;, Exhaust emissions and its control methods in compression ignition engines: a review, International Journal of Automotive Technology, 2013,
Brijesh, P; Chowdhury, A; Sreedhara, S, Effect of Ultra-Cooled EGR and Retarded Injection Timing on Low Temperature Combustion in CI Engines, SAE international,, 2013,
Sreedhara, S; Lee, Y; Huh, Kang Y; Ahn, DH, Comparison of submodels for conditional velocity and scalar dissipation in CMC simulation of piloted jet and bluff-body flames, Combustion and Flame, 2008,
Kim, Jong-Soo; Sreedhara, S; Huh, Kang-Yeol; Yang, Won, A Study on the Structure of Turbulent non-Premixed Oxy-fuel Flame Using CMC Model-based Simulation, Journal of the Korean Society of Combustion, 2008,
Sreedhara, S; Huh, Kang Y, Conditional statistics of nonreacting and reacting sprays in turbulent flows by direct numerical simulation, Proceedings of the Combustion Institute, 2007,
Sreedhara, S; Huh, Kang Y; Park, Hoyoung;, Numerical investigation for combustion characteristics of vacuum residue (VR) in a test furnace,, Energy,, 2007,
Sreedhara, S; Huh, Kang Y, Modeling of turbulent, two-dimensional nonpremixed CH4/H2 flame over a bluffbody using first-and second-order elliptic conditional moment closures, Combustion and flame,, 2005,
Sreedhara, S; Huh, Kang Y, Assessment of closure schemes in second-order conditional moment closure against DNS with extinction and ignition, Combustion and flame, 2005,
Sreedhara, S; Lakshmisha, KN, Autoignition in a non-premixed medium: DNS studies on the effects of three-dimensional turbulence, Proceedings of the Combustion Institute, 2002,
Sreedhara, S; Lakshmisha, KN;, Assessment of conditional moment closure models of turbulent autoignition using DNS data, Proceedings of the Combustion Institute, 2002,
Sreedhara, S, Development of 3D Computer code to study Autoignition in a Turbulent Medium, Journal of Aeronautical Society of India, 2002,
Sreedhara, S; Lakshmisha, KN, Direct Numerical Simulation of scalar mixing and autoignition in a turbulent medium, JOURNAL-AERONAUTICAL SOCIETY OF INDIA, 2001,
Sreedhara, S; Lakshmisha, KN, Direct numerical simulation of autoignition in a non-premixed, turbulent medium, Proceedings of the Combustion Institute, 2000,